Spring Bunny and Bear | Free Amigurumi Pattern

Spring Bunny and Bear gif of cute kiss. Made with the easy amigurumi pattern from Tiny Curl crochet.

Ah spring… flowers in bloom, pastel colors, and cute little amigurumi animals everywhere. With their sweet stripes and squishy bellies, Spring Bunny & Bear are the perfect amigurumi to wash those winter blues away! They are the perfect size for little hands and make excellent baby shower gifts! Stuff a rattle into the body and you have the CUTEST crochet baby rattle!

~*You can purchase an INEXPENSIVE AD-FREE PDF of this pattern in my Etsy shop HERE!  The beautifully formatted pdf includes step-by-step instructions in a printer-friendly package! Thanks for your support! *~

Some links in this post are affiliate links. This means that at no extra cost to you, I will receive a small commission on purchases made through these links. Thank you for supporting the content you see here on Tiny Curl!

So let’s get started!

two amigurumi bears and a spring bunny amigumrumi with yarn, scissors and markers. DIY custom fabric tabs are also visible on the amigurumi dolls.

MATERIALS (recommendations in parentheses)


GAUGE

12 single crochet stitches x 13 rows = 2×2 inches. The final size is approximately 5 inches tall for Bear and 7 inches tall for Bunny.

CROCHET STITCHES & ABBREVIATIONS (US TERMINOLOGY)

ch – chain
mr – magic ring
rnd(s) – round(s)
st(s) – stitch(es)
sl st – slip stitch
sc – single crochet
inc – single crochet increase
inv dec – invisible decrease
hdc – half double crochet
x – times (indicates number of times to repeat)
[ ] – repeat steps between brackets for the specified number of times
( ) – the number of stitches you should have at the end of each round

SPECIAL TECHNIQUES

  • Magic ring – Watch tutorial here.
  • Invisible decrease – Watch tutorial here.
  • Finish off – Watch tutorial here.
  • Changing color – Take last yarn over of st before color change with new color. Continue working with new color.
  • Sl st after color change – Using a sl st after your color change makes the color change look a little smoother and less jagged.

NOTES

  • All sections are worked in a continuous round, unless otherwise specified.
  • Mark the beginning of each round with a stitch marker.
  • Demonstration photos are shown right handed.
  • Count sl sts in pattern as sts.
  • The body is the same for Bunny and Bear.
  • Not all yarns are created equal! Yarns listed as the same weight (e.g. worsted) frequently differ in size and stretch. I Love This Cotton is on the thinner end of worsted yarns.

An amigurumi spring bunny and amigurumi bear leaning up against one another. The spring bunny is pink and the amigurumi bear is light green.

SPRING BUNNY & BEAR PATTERN

BODY (start with color A)
rnd 1: Start with a mr, sc 6 (6 sts)
rnd 2: Inc 6x (12 sts)
rnd 3: [sc 1, inc] 6x (18 sts)
rnd 4: [sc 2, inc] 6x (24 sts)
rnd 5: [sc 3, inc] 6x (30 sts)
rnd 6: [sc 4, inc] 6x (36 sts)
rnd 7: [sc 5, inc] 6x (42 sts)
rnd 8: [sc 6, inc] 6x (48 sts)
rnds 9-16: Sc around (48 sts for 8 rnds)
rnd 17: [sc 6, inv dec] 6x (42 sts)
rnd 18: [sc 5, inv dec] 6x (36 sts)
rnd 19: [sc 5, inc] 6x (42 sts)

 – – YOU’LL BE CHANGING COLOR STARTING IN THE NEXT ROUND. COUNT EACH SL ST AS A NORMAL ST. DON’T CUT COLOR B OR C, CARRY THE YARN UP INSIDE OF THE BODY. – –

rnd 20: Sc 1, change to color B, sl st, sc 4, inc, [sc 6, inc] 5x (48 sts) Cut color A and weave in.
rnd 21: [sc 7, inc] 6x (54 sts)

 – – – EMBROIDER FACE BEFORE CONTINUING. SEE PHOTO TUTORIAL BELOW – – –

rnd 22: Sc 1, change to color C, sl st, sc 2, inc, [sc 8, inc] 5x, sc 4 (60 sts)
rnd 23: Sc 2, change to color B, sl st, sc around (60 sts)
rnd 24: Sc around (60 sts)
rnd 25: Sc 2, change to color C, sl st, sc around (60 sts)
rnd 26: Sc 3, change to color B, sl st, sc around (60 sts)
rnd 27: Sc around (60 sts)
rnd 28: Sc 3, change to color C, sl st, sc around (60 sts)
rnd 29: Sc 4, change to color B, sl st, sc around (60 sts)
rnd 30: Sc around (60 sts)
rnd 31: Sc 4, change to color C, sl st, sc around (60 sts)
rnd 32: Sc 5, change to color B, sl st, sc 2, inv dec, [sc 8, inv dec] 5x (54 sts)
rnd 33: Sc 4, inv dec, [sc 7, inv dec] 5x, sc 3 (48 sts)
rnd 34: Sc 5, change to color C, sl st, inv dec, [sc 6, inv dec] 5x (42 sts)
rnd 35: Sc 2, inv dec, sc 2, change to color B, sl st, sc 2, inv dec, [sc 5, inv dec] 4x, sc 3 (36 sts) Cut color C and weave in.
rnd 36: [sc 4, inv dec] 6x (30 sts)

 – – – BEGIN STUFFING AND CONTINUE STUFFING UNTIL YOU CLOSE THE BODY. – – –

rnd 37: [sc 3, inv dec] 6x (24 sts)
rnd 38: [sc 2, inv dec] 6x (18 sts)
rnd 39: [sc 1, inv dec] 6x (12 sts)
rnd 40: Inv dec 6x (6 sts)
Fasten off, leaving a 12-inch tail. Finish off and weave in any remaining ends.

– – – MAKE EITHER THE BEAR EARS OR BUNNY EARS & TAIL TO FINISH YOUR DOLL! – – –

BEAR EARS (Make 2 using color A, not a continuous round)
rnd 1: Start with a mr, sc 7, ch 1, turn (7 sts)
rnd 2: 7 hdc (7 sts)
Fasten off, leaving a 12-inch tail for attaching. Weave in beginning yarn tail. See photo tutorial for attaching on page 5.

BUNNY EARS (Make 2 using color A)
rnd 1: Start with a mr, sc 4 (4 sts)
rnd 2: [inc, sc 1] 2x (6 sts)
rnd 3: [inc, sc 2] 2x (8 sts)
rnds 4-12: Sc around (8 sts for 9 rnds)
rnd 13: Sc 7, sl st in last st of rnd (8 sts)
Fasten off, leaving a 12-inch tail for attaching. Weave in beginning yarn tail. See photo tutorial for attaching on page 5.

BUNNY TAIL (Using color A)
Make a pompom with a diameter of 1.5 inches. Leave two 8-inch yarn tails to secure. See photo tutorial for attaching on page 6.

EMBROIDERING THE FACE

Click here for an in-depth amigurumi face embroidery tutorial

Embroidering on crochet takes a bit of practice, but it gives your amigurumi lots of personality. The key to embroidering on crochet is to make sure to insert your needle through your stitches and not in a hole between stitches so your thread remains secure. It is also much easier to embroider on crochet before you’ve finished and stuffed your piece.

To begin, cut a 24-inch piece of fine weight yarn or embroidery floss (using all 6 strands). Thread embroidery needle and double knot end.

If you’d rather not embroider the eyes, simply use safety eyes between rnds 11 and 12 and just embroider the nose and mouth using steps 1-5.

Beginning of the amigurumi face embroidery for the Spring Bunny & Bear Amigurumi Pattern by Tiny Curl.

1. To make the nose, bring threaded needle up through st on rnd 12 of head on side opposite color changes.

Beginning of the amigurumi face embroidery for the Spring Bunny & Bear Amigurumi Pattern by Tiny Curl.

2. Make a french knot by wrapping thread tightly around needle twice.

Beginning of the amigurumi face embroidery for the Spring Bunny & Bear Amigurumi Pattern by Tiny Curl.

3. Finish french knot by holding knot tightly to body and inserting needle very close to the hole you came up from.

Nose is complete, now making the mouth connectors for the amigurumi bear.

4. To make the mouth, bring needle up through st on rnd 13 to the left of nose.

Nose is complete, now making the mouth connectors for the amigurumi bear.

5. Insert needle under bottom of nose to make one side of mouth. Repeat step 4 and 5 for right side of mouth.

Starting the amigurumi face embroidery for the eyes of the amigurumi bear.

6. To begin eye, bring needle up through st on rnd 11.

Starting the amigurumi face embroidery for the eyes of the amigurumi bear.

7. Insert needle into st of rnd 12, below and slightly to the side to follow curve of eye.

Starting the amigurumi face embroidery eye lashes of the amigurumi bear.

8. Bring needle up through st of rnd 13 following eye curve. Insert needle through bottom of previous st. Repeat 6 more times to finish curve of eye. Eye should be 4 sts wide.

Starting the amigurumi face embroidery eye lashes of the amigurumi bear.

9. To make the lashes, bring needle up through st near eyeline. Insert needle through hole on eyeline. Repeat 7 more times for a total of 8 lashes.

Amigurumi face embroidery completed for the amigurumi bear.

10. Mirror steps 6-9 for other eye (start in the inner corner).

ATTACHING THE BEAR EARS

Attach Bear’s ears at the center of the head between rounds 3 and 8 using tapestry needle and yarn tail.

Attaching amigurumi ears for the Spring Bunny & Bear Amigurumi Pattern by Tiny Curl.

1. Insert threaded needle through hole next to knot to begin.

Attaching amigurumi ears for the Spring Bunny & Bear Amigurumi Pattern by Tiny Curl.

2. Insert needle under st of rnd 4 at center of head.

Attaching amigurumi ears for the Spring Bunny & Bear Amigurumi Pattern by Tiny Curl.

3. Insert needle in next hole through front of ear.

Attaching amigurumi ears for the Spring Bunny & Bear Amigurumi Pattern by Tiny Curl.

4. Insert needle back through same hole you came out of in step 2 and under st of next rnd. Repeat steps 2 & 3 four more times to end of ear.

Attaching amigurumi ears for the Spring Bunny & Bear Amigurumi Pattern by Tiny Curl.

5. When you get to end of ear, insert needle into head through same stitch you came out of.

Attaching amigurumi ears for the Spring Bunny & Bear Amigurumi Pattern by Tiny Curl.

6. Bring needle out through back of head. Thread through several stitches to secure.

Attaching amigurumi ears for the Spring Bunny & Bear Amigurumi Pattern by Tiny Curl.

7. Bring needle out through another part of Bear’s head. Cut yarn close to head so loose end retracts into Bear.

Attaching amigurumi ears for the Spring Bunny & Bear Amigurumi Pattern by Tiny Curl.

8. Repeat steps 1-7 for left ear, starting on the outer left corner.

ATTACHING THE BUNNY EARS

Attach Bunny’s ears at the center of the head between rnds 1 and 5 using tapestry needle and yarn tail.

Attaching amigurumi ears for the Spring Bunny & Bear Amigurumi Pattern by Tiny Curl.

1. Insert threaded needle under st on rnd 2 at center of head.

Attaching amigurumi ears for the Spring Bunny & Bear Amigurumi Pattern by Tiny Curl.

2. Insert needle through next st of ear from inside to outside.

Attaching amigurumi ears for the Spring Bunny & Bear Amigurumi Pattern by Tiny Curl.

3. Insert needle back through same hole you came out of in step 1 and under st of next rnd. Repeat steps 2 & 3 six more times until you’ve gone around ear.

Attaching amigurumi ears for the Spring Bunny & Bear Amigurumi Pattern by Tiny Curl.

4. When you’ve reached end of ear, insert needle through first st attached and back into head.

Attach the Bunny Ears - Bunny & Bear Amigurumi Pattern by Tiny Curl

5. Bring the needle out through back of head. Thread through several stitches to secure. Then bring needle out through other part of Bunny and cut yarn close to body.

Attach the Bunny Ears - Bunny & Bear Amigurumi Pattern by Tiny Curl

6. Repeat steps 1-5 for other ear.

ATTACHING THE BUNNY TAIL

Attaching Bunny Tail yarn pompom - Bunny & Bear Amigurumi Pattern by Tiny Curl

1. Thread tapestry needle with one yarn tail. Insert needle under st below rnd 20.

Attaching Bunny Tail yarn pompom - Bunny & Bear Amigurumi Pattern by Tiny Curl

2. Insert needle through center of pompom. Pull tightly so pompom is flush with body. Repeat steps 1 & 2 four more times to secure.

Attaching Bunny Tail yarn pompom - Bunny & Bear Amigurumi Pattern by Tiny Curl

3. Tie both yarn tails together with a double knot. Pull tightly so the knot is hidden under pompom.

Attaching Bunny Tail yarn pompom - Bunny & Bear Amigurumi Pattern by Tiny Curl

4. Thread needle with both yarn tails, bring out through another part of body. Pull yarn tightly to retract knot into body. Cut tails close to body.

Amigurumi Spring Bunny and amigurumi Bear behind view with pompom yarn Spring Bunny tail attached.

I hope you enjoyed the Spring Bunny & Bear amigurumi pattern! If you have any questions about the pattern, leave a comment below and I’ll try to give you some answers!

I’d love to see your Spring Bunny & Spring Bear – use #tinycurlpattern to share on Instagram!

Ah spring... flowers in bloom, pastel colors, and cute little amigurumi animals everywhere. With their sweet stripes and squishy bellies, Spring Bunny & Bear are the perfect amigurumi to wash those winter blues away! They are the perfect size for little hands and make excellent baby shower gifts! Stuff a rattle into the body and you have the CUTEST crochet baby rattle!

ヽ(゚ー゚*ヽ) 
This amigurumi pattern is an original crochet pattern by Kristina Turner of Tiny Curl. Please do not claim this pattern as your own. If you wish to share this free pattern, you may link to it, but please do not reprint it on your site. You may keep a copy for your own personal use, but please DO NOT sell the crochet pattern or distribute it. Thank you for your understanding.

You can sell items made from this free crochet pattern, as long as they are handmade by you in a limited number and you give credit to me as the crochet designer. Please use the following line in the item description of any toy you are selling:
• This amigurumi toy is handmade by (your name) from a design and pattern by Tiny Curl, Kristina Turner | tinycurl.co • 

(ノ*゚ー゚)ノ

One thought on “Spring Bunny and Bear | Free Amigurumi Pattern

Leave a Reply

Your email address will not be published.